|
Re: three on the tree problem
Before tearing into the steering column check under the hood first. The bushings might be worn out where the linkage hooks up and the same on the tranny where the shifting rods hook up. Replace these and grease the shifting parts good if this don't correct your problem you will need to tear into the column or go to a three in the floor.
__________________
'99 Blazer LT Loaded, K&N Filter, Pioneer Super
Tuner,Viper
'98 Pontiac Grand Prix GT, 3.8
'88 K1500 Cheyenne, 5.0, stock, bought new
'86 Nissan 720 Trash Truck
'69 C/10 step side, 307, all original, second owner, in process of restore.
The person who says it cannot be done should not interrurt the person doing it.
Share your knowledge. It is a way to achieve immortality.
Allen- Paintman
Wrenchtwister
Broompusher
|