I have a 92 wagon. When I got it, it was in bad shape. I put a engine in it, both tie rod ends, struts,tires and wheels, new rotors and had the front end aligned.
It pulls to the right. Also the streering wheel is not centered, it is 1/4 turn to the left. The guy at the shop told me that to get it in alignment he had to unscrew the passenger side tie rod so far that he could not straighten the wheel any more. There wouldn't be enough threads to hold the tie rod to the inner tie rod safely. He also said he got everything within spec's, so I thought all was fine. It still pulled. OK so I figured the sub frame was out of alignment and I got under it and adjusted it. It wasn't out very much. No change. I also checked that the streering wheel was positioned in the center of travel, it was perfect. Before I did anything to it, it was pulling to the right alittle, but the steering wheel was 1/4 turn to the right. I checked the frame as best I could, there doesn't seem to be any damage, or signs of repair. I don't know what to do next. Has anybody out there run in to this problem before?
Thanks
Nick