|
My $tillen intake was originally purchased in '94 for my '91 NX2000 w/o sensor. I sold the NX and put the intake on my '96 G20 w/sensor. I purchased a new K&N filter and wanted to attach the sensor to it. Here is what I did:
1. I used the brass plate from the sensor for a template to drill the holes on the chrome end cap of the K&N filter. For aesthetic purposes I mounted the sensor below the K&N logo (see pics)
2. I used a small knife and needle nose pliers and pulled off the rubber from inside the filter so that I could use the original sensor bracket and screws. This makes for a flush fit.
3. Installed the K&N on the $tillen intake and Voila'
__________________
Brandon
'96 G20 - modified
|