|
Re: horsepower: from turbo back 3 inch on rb25det?
An R33 in Australia with 10psi and a 3" exhaust with a good hi-flow fuel pump and a stock ECU should be putting out around 170rwKw's or about 230rwHp. Flywheel figure would be around 240Kw(320Hp) as Australian dynos are calibrated for 30% drivetrain loss.
The Z32 AFM is a waste of time unless your factory AFM is holding you back... Z32 does cause idle problems though as it looses its tuning resolution. Keep the stock AFM until your making more than 240KW's@wheels.
__________________
N14 Pulsar
VQ35 conversion with major N/A upgrades, 6 spd FWD manual HLSD
18" Rims, big brake kit, Coil overs and freshly painted
Smashed Black VY SS Ute 
The workhorse...
Twin turbo 5.7L LS1 
Boyd Coddington 19" Turbine Wheels
AP Racing 4 Piston Brakes
Tein Coil over Suspension
HKS EVC 6 Boost Controller
PLX Devices DM-200 OBDII
Custom Front Mount Intercooler
|