|
Re: My problem must be clucth slippage...
judging by the house in the background of your sig you are not poor...
Stock flywheel with the correct step height. And a simple 2100 or Exedy stage 1 should be fine for anything between stock and +25%. Anything between 26% and 75% increased output you should look into a 2600 or Exedy stage 2.
Use OEM throw out bearings only. Clutch forks are clutch forks. You might want an extended slave rod for peddle adjustments. Might as well get some $30 SS clutch lines..
__________________
DSM geek
|