Quote:
|
Originally Posted by welfarepc
So I swapped my oil burning D15B2 for another D15B2 from the junk yard... droped it in with an Si tranny i picked up from the yard as well, and now im getting a check engine light after driving for a few minutes. it hasnt come on so far while idling... i checked the ECU for any codes, and the red light blinks every 3 seconds or so. just once. seemingly for ever. any ideas or information that might help eliminate the engine light illuminating?
as for code 1 (if thats what the ECU is showing me, not just the fact that its on) then the issue seems to be the O2 sensor. does that cause the check engine light to come on or does it just make the ECU throw a beep?
either way the engine seems to run nice and the tranny blows away the dx version. thanks in advance guys, and i appreciate all the information ive looked up on here to help along the way.
Dan
|
That's exactly how the code 1 operates. The Check engine light won't come on initially but will after a bit of driving, usually while slowing down. Are you sure it's plugged in? If not, replace it w/ a new one from autozone..they're about $17 I think.
__________________
Jumper harnesses, mpfi conversions, engine harness conversions, vtec subharnesses, etc.
The absolute lowest prices at the absolute highest quality. Trusted. Guaranteed.
Click the image above to visit our online store!
Hastings Bseries and Dseries piston ring kits (inc. ZC) - $49 shipped