[rhandwor]

I'm not sure I understand exactly what you are describing. When you try to start does the engine turn over. Or does nothing happen. If nothing happens when you turn the key to start. Check the ignition switch you can use a voltmeter and check for voltage from the ignition switch when you turn the key on.
Look on the steering column just below the two bolts that connect to the dash. A rod from the key tumbler pushes it to start.
Auto Zone or Advance check modules free if you take them in. The camshaft position sensor and crankshaft position sensor can be tested with an ohm meter. Disconnected with the ohm meter across the two contacts it should go from zero to one when cranking.