|
Re: sea foam?
BEFORE you do this, can i ask you: how many miles are your engine? WHY do you think you need/want to clean the oil & gas?
to clean the oil you can put ATF in there, and let it idle for about 15 mins (not sure on actual time, i'll double check). but whatever you do, do NOT drive it around with ATF. ATF is full of detergents, and it will clean it out really good. HOWEVER, since ATF will clean it soo well, when you put oil in it later (after draining ATF, obviously), your car may smoke. a friend of mine did this on his 3S TT. ATF cleaned his engine out soo well, its cleaned out all the oil deposits that were keeping the oil in the engine. so afterwards, he was forced to go to a thicker oil (20W-50, synthetic, Amsoil).
__________________
93 3000GT base
K&N | long tube headers | 3sx crank pulley| testpipe | Addco front/rear sway bars (3SX) | rear strut bar & front 3-point strut bar (by JonVr4 on 3Si) | solid motor mounts | LSD insert | KYB GR-2 struts | intrax springs | adj. control arms | ss brake lines | 16% taller 5th gear (teamrip.com) | H4 conversion | push-button start | datalogger | HKS S-AFR | PLX WB O2
coming soon: adj. cam gears | bi-xenon HID retrofit
|