[twistedtech]

This will get you started.Remove the positive cable from the battery,connect the clamp part of a test light to the battery and then the probe to the cable end.If you have a draw it will light up and should be bright.If it is dim or not on at all you have no draw.If it is lite up start pulling fuses one at a time until it goes out,then you have found the circut that is causing the grief and you can go from there.Don't forget,you cant have the door open or anything on at ALL when you do this,door open,draw on battery.You'll never find it.Everything off,find the circut,read a wiring diagrm,problem solved.