|
Re: Clunking noise
Put a floor jack under the right front. Pick up the wheel about 2 inchs put your hand on the top and bottom of the tire and check movement. Sit the truck down block back wheel put it in park. Have somebody move steering wheel watch the tie rod ends with a flash light. Look at shock bushings for wear. Check for uneven tire wear if uneven get a wheel alignment. Get some thing like a piece of 4 x 4 and put it close to tire after it is jacked up about 3 inchs as you rotate tire look for an out of round tire. Then place 4 x 4 by side of tire look for a bent rim. Then get a big crowbar and use the 4 x 4 and have somebody try to pick up the tire. Watch the ball joint with a flashlight. Push on side of shock and see if it makes a noise. You have to use judgment on any parts to replace.
|