Thread: ABS-VI System Questions - Technical
View Single Post
  #2  
Old 10-04-2006, 03:11 PM
Blue Bowtie's Avatar
Blue Bowtie Blue Bowtie is offline
Registered Offender
Thread starter 		 
Join Date: Mar 2006
Posts: 6,563
Thanks: 8
Thanked 346 Times in 341 Posts
Re: ABS-VI System Questions - Technical
I can read a minimum of 0.24V P-P (.07V RMS) with ANY hub movement, and voltage increases to about 100mV P-P at 1 RPS (60 RPM) of the hub (0.29V RMS). I can spin the hub at about 4 RPS (240 RPM) and make well over 850 mV RMS (2.6V P-P).
Pulse counts are consistent, so the prox seems to be reading every tooth of the reluctor.

Need any other information?

EDIT: Corrected "RPM" to "revolutions per second" for clarity.
Last edited by Blue Bowtie; 10-06-2006 at 06:56 PM.
Reply With Quote