|
Re: '79 won't start....?
while your trying to start it push the pedal to the floor and hold it for a little. and look to see if there is gas squirting into the carb when the pedal is pushed, you should see it squirt. its carb right??? if it is timing you loosen the bolt on the clamp down bracket on the manifold and spin the distributer- tiny turns make a big difference. if you turn it more then an 8th thats way far. you could try turning it a little each direction and trying to start it. might want to mark where the distributer initially was. remember just change it a tad, like an 1/8th an inch incriments
__________________
87 firebird formula ws6
(currently has a old 78 305 with the following upgrades,
including lots of miles and stock heads and internals....oops)
crane cam cam specs
performance valve springs and retainers, flowtech headers, 255 lph fuel pump,
holley 600cfm carb, weiand single plane manifold, a healty diet.
14.90 1/4 mile....just wait for the 406 to be finished
MY VIDEOS
MY PICTURES
-Tom
|