Quote:
|
Originally Posted by hodocka
I have to replace the outside mirror on my '95 Blazer and can't figure out how to remove door panel. The screw in the open handle cup is obvious but I don't see the " 2 small bolts under the arm rest" Is this just on newer models? Thanks !
|
First off try
THE SEARCH FUNCTION
Then remove the oval shaped cap with a small flat head screw driver.
Reguarding the op - I put JL XR4's in with custom sheet metal plates. Only took a little time with a jig saw and some patients. As far as the doors, I found that most good aftermarket speakers were too deep anyways. So in the fronts I used JL VR5.25cs with 1/2 mdf adapter rings. In the rear doors I have JLXR6.5cs with the same type of adapter plate made from some 1/2" mdf.
I wouldnt even mess around with trying to find direct replacement speakers. Just use a little ingenuity and put in what you want.
Im running a total of 15 speakers @ 1000 watts. All JL audio
