due to the way the belt routes, you cannot just remove and by-pass the A/C compressor on your car. Any attempt to do so will cause the water pump to spin backwards which will overheat your engine. Dorman makes a kit that includes a pulley and bracket that bolts to the compressor mounts that runs about $30-$40. Part number is 34196. Here's a link to the part on Dorman's website. I did one on a 96 Century, and I had to get new bolts and nuts to attach it, as the bracket has straight through holes, and the compressor has threaded holes so the original bolts were too short.
http://www.dormanproducts.com/cgi-bi...ist=1296:358:0