Quote:
|
Originally Posted by capriceowns
Im about fed up with my rochester right now, it has way too much shit for it to have it work, im really consdering replacing it with a holley 650.
Im in the process of hoooking the carb back up, but theres this contraption thing for it, its a series of hoses, a relay and two cricle vaccum things and there all hooked to eachother(it makes for one big pain in the ass)
theres 4 hoses that need to attach some where, a 2 large one, a medium one and a small one.
I have the small one were it has to go, the medium one as well, but one of the larger hoses needs to go somewhere. and i cant fucking figure out where.
Anyone have diagrams, or kniow the name of this worthless contraption?
|
Hold on tight and don't let it go yet. When I get home from work, I'll post up some pictures to help you with. Don't despair, when they're adjusted right these are really good carburetors. The thing you're referring to, if it's above the electric choke heater on the passenger side, is the choke pull-off.
If you're referring to the rest of the vacuum routing, I'll have that info later tonight. What year is your car?
__________________
1988 9C1 - Modified LM1 @ 275HP/350TQ - TH700R4 - 3.08 8.5" Disc Rear - see it at
http://www.silicon212.org/9c1!
2005 Crown Vic P71 - former AZ DPS - 4.6 liters of pure creamy slothness!
1967 El Camino L79/M20 old school asphalt raper
Remember - a government that is strong enough to give you everything you need, is also strong enough to take everything you have.