|
Re: ECM Motor Fuse
a year ago my 97 would run like crap and shut off also. Im not sure if its the same system but. I would get an o2 post cat code. SO i replaced it and nothing happen. Turns out where all the wires come up to the big harness in the back of the engine bay. The wires wore though the Loom and were slowly one by one being cut on the back on the engine as the motor moves slighty. I used a zip tie concoction to hold the wires away from everything. If u cant find anything i would start by looking around that area. around the back of the motor and the fire wall.
|