|
Re: Keith Black Pistons....
Quote:
|
Originally Posted by corning_d3
So I'm going thru my caprice(sb 350, LO5) and I was looking for some keith blacks and I can only find 'em in .030 or .060 over. It's an early rebuild so I'm not boring it, and it's still stock 4.00.. Anyone seen stock sizes?
|
When I did my 350, the only size they weren't available in was the .010 oversize - which meant I had to take a nearly mint block and have it overbored .020 because that was the first oversize they were available in. FWIW, they're the 22cc reverse-domed pistons .020 oversize. I use these with milled 64cc heads for an approx. 8.9:1 ratio. ->
Silvolite KB Signature Series
__________________
1988 9C1 - Modified LM1 @ 275HP/350TQ - TH700R4 - 3.08 8.5" Disc Rear - see it at http://www.silicon212.org/9c1!
2005 Crown Vic P71 - former AZ DPS - 4.6 liters of pure creamy slothness!
1967 El Camino L79/M20 old school asphalt raper
Remember - a government that is strong enough to give you everything you need, is also strong enough to take everything you have.
|