anyone ever have a faulty AC switch?
I have 96 Tacoma and drove it about 9 hours one day with AC working fine the whole time. The next time I turned it on, the light came on, but there was no cold air and I realized the compressor was not running. According to the owner's manual, the AC light is supposed to flash if something in the AC system is bad, but it was not flashing.
Before I checked anything else I checked my Haynes manual and it says to check the AC switch for continuity, which I did and I only get continuity on terminals 1 and 3 of the switch, but nowhere else with switch on or switch off. Is it really that simple that it is just the switch?