Quote:
|
I did find today that there was a code in the computer and I have cleared it off.
|
That's what I thought, if you have reset the ECU after cleaning your injectors then there shouldn't be a code, except if that is an existing problem, then the code will just reappear no matter how many times you reset your ECU. Let us know you are able to clear the code without it reappearing (you might have to see if there is a "keep alive fuse" for the ECU, and if there is, you will have to pull that one also).
Quote:
|
and I did pull the fuse for the ecu for 10 mins after the car was warmed up and then started and let it idle for 5 mins.
|
The correct procduce is to reset your ECU is:
1. Start your engine and wait until it idle at normal operating temperture
2. Turn off your engine
3. Pull out your ECU fuse and wait 10 seconds or more
4. Put the ECU fuse back
5. Start your engine and let it idle at normal operating temperture for about 5 minutes