Quote:
|
Originally Posted by DUBS TSR
I plan on throwing on some Pulleys next, then possibly some new springs for suspension.
|
Yeah definitely - Unorthodox has an underdrive pulley for about $225. Springs are always nice - Eibach makes a sweet set (and the Neon is 4 wheel MacPherson which is nice).
Quote:
|
Eventually after the project is finished might consider throwing in a Hahn Turbo. (Your thoughts on this?)
|
A turbo is good but keep yourself to 8 psi-ish unless you add the camshafts, cam gears, and even pistons.
Very important with your turbo is upgrading the ignition system so don't get ahead of yourself.
Before you get to the turbo, considering the size, weight, and transmission on the Neon I'd consider a stage 3 clutch (Clutchmasters) and stage 2 axles... Neither are completely necessary, I'm sure - but a good investment before forced induction. The clutch setup is really important, too, if you are thinking about dragging or even if you're a hard shifter like me. I rode my OEM clutch out before I even started repairing the motor.
As for a boost controller - I like GReddy but they run top dollar. I'm still natually aspirated cause I wont go turbo until I can afford all the piggybacks.