Quote:
|
Originally Posted by jd-autotech
ok retreiving the code and sharing that info is job # 1 -when then the light comes back on ethier have it scanned or poke a paper clip between the two top right terminals on your aldl connector under left side of dash and watch the check engine light flash and count the flashes,qiuck flashes represent 1 and long flashes represent 10 heres a sample long, quick quick would be code 12. and there is often more than one so write them down and post em and we will see whats what.after they are done they will repeat so you double check. key on engine off. so when the light comes on shut off the engine but dont let the key go back too off. just turn the key back enough to kill the engine and then foward as far as it will stay by itself with out engauging the starter. i hope that makes sense.
|
For everyones info here, the above procedure will not work on most 95 GM cars as this is the transitional year from obd1 to obd 11, a proper scanner with the appropriate adapter will be required to get the codes. BTW, welcome to AF, young man.