Quote:
|
Originally Posted by TQuentin1
Thanx Gnomonic!! Good reference. I will print that out and take it with me in case the inspector gives me grief. Based on all the references that MT-2500 included, I guess it would be wise to put that little bulb back in the dash and not worry about it. I learned to drive up in the Northeast about 35 years ago on snow and ice when we had to "pump the brakes" to keep from locking up the wheels. So even if the ABS does not work, I am not gonna sweat it.
I am not sure that the ABS system resets itself. MT, if you have that info from the manual, I would be very interested in what it says. With the 95 LeSabre, will the OBD1 scanner show trouble codes for the ABS sys? I just got a 2001 Crown Vic, so that uses an OBD2 scanner. Consequently, if I am gonna get scanner, it would be advisable to get one that will be useable on both cars.
TQ
|
It is basic knoledege that a ABS system clears itself every ign cycle.
It only stores history codes. If the ABS light stays on after start up you have a hard/present code or problem and the ABS brakes system shuts off if it light is on.
If you want to read about go here.
http://www.alldata.com/products/diy/index.html
Or get a good service manual on them.
Also another problem you may have on the scanner for a 95 in is inbetween OBD1 and OBD11 or could be either one.
You will need a special scanner and adapter to read it and also a scanner that is ABS capable to get ABS codes or read out ABS system.
http://www.troublecodes.net/GM/
Good Luck and let us know how it goes.
MT