|
Your fan switch is fine.
You need a new resistor block.
The resistor block controls the fan speed. It's located on the HVAC ducts (quack - quack) under and behind the glove box. It sits on the air duct after the fan motor. There is a connector with several wires on it. Unplug it, remove the resistor block from the duct and replace it.
Go to your Nissan dealer to obtain the resistor block first so you know what to look for once you get under there.
Your fan speeds 1,2, & 3 will work once you replace the resistor block.
__________________
99 SE LIMITED - A few changes here and there but most of all SPOTLESS!
|