|
Re: Duplicolor Question
In my humble experience: don't mix.
I've had really bad results when spraying different marks. I once tested some MOTIP clear over tamiya metalic red and it was OK. Then i did MOTIP clear over tamiya aluminium and the clear dissolved the paint and etched trough the primer into the plastic. Took me so long to clean that up. Use same type of primer, paint and clear and you'll be save. The tamiya pirmer should be good for the duplicolour.. but i would bet my head on it.
What i have experienced is that marks like MOTIP and DUPLICOLOUR are slightly inferiour to tamiya, but MUCH cheaper. And if you take you're time with polishing the duplicolour, you'll have a startling paintjob. Just.. use the same brand for paint and clear... you won't regret it.
|