Re: Belt Tensioner Assembly
rduke;
you can change the back spark plugs by removing the top plenum. It takes a quite for a while to remove the plenum, but it is quite simple job.. just takes time. Just make sure you have new plenum gasket ready before removing it to save time. Once you remove the plenum, it is real simple job to change the spark plugs and oxygen sensors. The spark plugs of my car were changed 2 years ago by pep boys, and I realized that they misthreaded and overtightened the spark plugs and they did not connect the plug cable correctly after I decided to change again by myself because of the rough idle.
Mike from Ohio
|