Quote:
|
Originally Posted by jjubeck619
It was at 10 psi then I changed the fuel filter and brought them up to 51 psi. Still can't get the car started though, even after all that work. What else could cause this kind of problem and cause a misfire code to appear, besides coils, module and plugs?
|
The 51 psi is good. I would say that you do not have a fuel supply problem at least from the FPR back to the filter and fuel pump. Of course, it doesn't rule out the fuel injectors. Although you have a #6 misfire code that one cylinder should not prevent the engine from at least attempting to fire up.
Have you checked physically for spark at any of the spark plugs? Also, you may have to hookup a noid light to see if the injector pulse is getting to each fuel injector from the PCM module.