Quote:
|
Originally Posted by busa4
yep thats what i figured. jump terminals 4 and 5 and see/listen to what comes on. if your pump is good you should hear the pump.
|
The relay socket that only uses 4 of the pins though, it is pin #4 that is not in use... still jump pin #4 to #5 on the relay? on the socket only using the 4 pins (not pin #4)? (kinda confusing all the 4s :P hope it makes sense)
To clarify, on the socket that only uses 4 of the 5 relay pins, #1,2,3,5 are in use, and #4 is not (but still plugs into the empty connector).
The relay socket next to it, uses all 5 of the relay pins.