[BrodyP]

Tools Needed: 3/8inch wrench, 17MM socket, funnel, 4 Jack stands

Once the front of your car is up on the two jack stands, get out your funnel, wrench, and 17mm socket.

Place the wrench (without any socket attachments) into the bolt. As you can see, bolt has a hole in it that fits your wrench perfectly. Unscrew the bolt by turning couter-clockwise. Have a small bucket to catch all the manual transmission fluid about to pour out of where the bolt is located. Once all the fluid has been drained tighten bolt back on to the transmission.

Place the end of the funnel into the hole created by removing the other bolt. Put the manual transmission fluid into the funnel. Once 1 quart is done start on the second but pouring very slowly. Once about 60% of the second quart has been used, the hole from bolt might start to overflow.

Take out the end of funnel and put the bolt back on and screw it in.

Use Honda manual transmission fluid.
2 quarts.