Quote:
|
Originally Posted by Titan2006
any idea where to look for this resistor pack in a 2003 Buick Rendezvous
or do you know of a internet link to a diagram or other info on how to do it yourself
thanks again
|
I don't have a diagram, but here are the instructions from the factory manual:
1) Remove the right side instrument panel insulator. (below the dash)
2) Disconnect the blower motor electrical connector.
3) Remove the blower motor mounting screws.
4) Remove the blower motor from the HVAC module assembly.
5) Disconnect the electrical connector from the blower motor resistor assembly.
Important
Only loosen both of the forward blower resistor assembly mounting screws. The blower motor resistor assembly mounting holes are slotted.
6) Loosen the forward blower resistor assembly mounting screws.
7) Remove the rearward blower resistor assembly mounting screw.
8) Remove the blower motor resistor assembly from the HVAC module assembly.
Installation is the reverse of the above instructions.
Take Care,