Quote:
|
Originally Posted by wrightz28
Again, there is a lip in the valve cover that the gasket goes in to, that properly seals it to the cylinder head (provided there is no resedue from the old gasket either).
So simply to change the gasket you remove the cover, flip it over, pull out the old gasket, scrape the cylinder head of any old gasket, install the new gasket into the cover, flip it (cover) over and reinstall to the head.
|
man, l didnt even touch the heads.. l just removed the right VALVE COVER. and l wanted to put new one and it didnt fit and l put the old valve cover back.
l just figured out that oil is coming under the valve cover and hot engine burns the oil and makes smoke and bad smell.. l will need to remov the valve cover and adjust the valve cover gasket!
DAMN.. l shouldnt have even touched the valve covers..