Quote:
|
Originally Posted by MT-2500
Welcome to AF on your first post.
First as always check all fuses.
Is it just the 4x4 light that does not light up.
If so pull codes by grounding pin 13 on the diagnostic connector and tell us what lights light up or blink and how many blinks.
MT
|
I'll do it... I still need a wire diagram but going to get that today... easy enough thanks for the response...
and I've already tried switching it to neutral and switching to low both don't work... the switch isn't the problem now because both 4hi and 4lo flash on start up now... But when i try to switch to them they don't light up... so could it still be a problem with the fuses? thanks
-DB-