View Single Post
  #2  
Old 05-30-2006, 10:22 PM
MT-2500's Avatar
MT-2500 MT-2500 is offline
AF - Advisor
 
Join Date: Sep 2005
Posts: 16,690
Thanks: 5
Thanked 121 Times in 120 Posts
Re: 4x4 1999 Blazer switch problem

Quote:
Originally Posted by Blazer_boy
1999 chevy Blazer, v6, 80,000 miles, believe it's a 4.3L

2 years ago I had the 4x4 problem totally fixed for around $1700. Had to switch the transmission at least thats what they told me... I don't know tons about cars so slowly trying to learn more. Well my Blazer now has the same problem it did, but the switch isn't even lighting up when you switch to 4x4 mode, so I bought a new switch, this one isn't lighting up either, turns out the wiring might be the problem so will go look at that... has anyone else had high ammounts of problems with the 4x4 switch on the 99 blazers? Personally I'm not going to replace my transmission again for a while don't have the money and the Blazer runs fine in 2WD. I was just wondering if anything else besides the switch, wiring or transmission could be the problem, I dont think there really is but yea let me know. Like I said I'm still learning more about cars and trying.

thanks, DB
Welcome to AF on your first post.
First as always check all fuses.
Is it just the 4x4 light that does not light up.
If so pull codes by grounding pin 13 on the diagnostic connector and tell us what lights light up or blink and how many blinks.
MT
__________________
Remember proper testing gives us the answer to many problems.
MT