|
Re: 98 Blazer transfer case encoder motor
I have never heard of removing the transfer case to change the encoder motor. Is it an auto trac? Even still once the encoder motor is loose turn it so the top side is down then slide it out at a right angle. I've hade to do it a couple of times on my 98'. My problem ended up being the TCCM. From what I understand the encoder motor rarely fails. To test while the 4hi is trying to engauge tap the black motor part with a hammer. Remember I said TAP! to see if it will enguage. If it does enguage, the next componet is the actuator under the battery or the vaccum line that runs to it. Lots of luck!!!!
Hunter
|