|
Re: 97 Lesabre engine swap
Did you get the transmission to motor mount off? Should have been the same piece of metal where you slid the long extension into, it should either be 13mm or 15mm bolts. Otherwise, the 6 bell housing bolts and the starter have to come off, the 3 bolts on the flywheel are off.
Assuming you have all those out, then you would probably need to work the motor (on a hoist of some sort, I assume) back and forth and see if someone can try to pry between the motor and trans while it is being wigggled. That may do it.
|