[Alibi]

If it is similar to the older syle (as in 1990ish), which I am fairly sure it is, there should be a length of wire that runs into the column itself. This wire has a harness about 3 inches after it leaves the switch itself. To access the harness, you will probably have to pop off a plastic panel somewhere around the switch. After you've accessed and unclipped the harness, all you should have to do to the switch is just tug on it and it'll pop out.

I got a replacement from a spare column I had in my wrecked car in my back yard, but they are pretty common to pick up at a junkyard too, and probably are fairly cheap as well. If not, there is always Ebay.

Anyone else have a 95 vehicle to help clarify and update my info?