Quote:
|
Originally Posted by cao226
Dan,
Thank you for your reply. Checking the ground sounds like a great idea, but of course I have a couple of questions:
1) when you say hook a wire up to a "known good ground" do you my on the car (like the engine block) or something else...like my house...(ok as I write this the 'house' idea but I'll ask anyway :-D)…also can I use jumper cables or do I need a smaller wire?
2) When attaching the wire to the door wouldn't I need to get to bare metal? Do I actually need to scrap off paint?
3) Since both front doors are experiencing the problem, do I need to ground both of them?
Thanks again for any help.
Chris
|
Chris
Lets say away from the house!
The ground on the battery is good. Try to find bare metal. I think you would only need to check one door. (this would prove a bad ground) Jumber cables would work if they're long enough. 12-14 g wire should be okay for this test.
Regards
Dan