Quote:
|
Originally Posted by CINDY72UK
So any sugestions then?
|
The two most commons problems on an Alero with key stuck is a defective key lock cylinder (tumbler) at the ignition switch or the cable from the shifter when in PARK. The cable could be stretched, out of adjustment or broken. If you press on the button located on the left hand side of the shift knob you should hear a clicking or clunking sound around the area of the ignition switch as you move the button in and out. If you hear that clicking/clunking then the shift lock cable is probably good and the key lock cylinder is bad. If you do not hear the sound then the problem is the cable or back at the shifter. Good luck!