View Single Post
Old 03-20-2006, 01:12 PM   #10
MT-2500
AF - Advisor
 
MT-2500's Avatar
 
Join Date: Sep 2005
Location: New London, Missouri
Posts: 16,690
Thanks: 5
Thanked 121 Times in 120 Posts
Re: Auto transfer case maintenance

Quote:
Originally Posted by Moser97
NP 236 CM, don't hold me to the CM the tag is banged up. It had red in it, and a tag calling for Dexron lll. I filled it with blue, drove around for a half hour, drained it and refilled with blue. It still chirps in a tight turn with the Auto 4wd on. I guess I'll do the differentials with synthetic gear lube next.
The 99 gmc jimmy 236 calls for the blue gm fluid.
In auto mode the front axels/drive shaft should not engage unless the rear wheels are slipping.
You may need to drive it a while for the blue fluid to start working.
Are you sure the transfer case has not been replaced or switched?
If it keeps on doing it get a good scanner on it and check out the transfer case operation. If it has any problems it should show pp on a good scanner that can read transmission/transfer case and body codes and data.
Also most good scanners have some test you can run on it.
If it shows any B or C codes post back code no.
MT
__________________
Remember proper testing gives us the answer to many problems.
MT
MT-2500 is offline   Reply With Quote