|
Re: Another easy 1.. 1997 lumina 3.1 A/C compressor
Make sure you replace the orifice filter in the high pressure line going back to the condenser, to be sure no contaminants are clogging the system. IT would be a good idea to replace the accumulator/receiver drier too as it could be contaminated with metal from the compressor going out. The o-rings should come with the new compressor, if not, replace them too. IF just the clutch/bearing seized, you may be lucky and not have any metal in the system, but at least replace the orifice, it's only a $2-$3 part. I assume you're going to convert it to R-134 at the same time.
__________________
Still waiting for the "good old days" I'll get to bore my future grandchildren with!
|