|
Re: Fixing my DSM... head gasket, timing/bs belt, b, and tranny fluid/oil questions
I will only use Mitsu parts for personal reasons.. The Cometic HG can be used and resused as long as the head has a RA-30 finish & all the layers of the gasket are visually ok...
A good machineist will charge $185 for a milling of the head to a RA-30 finish, 3 valve angle job, hot tank, pressure test, and reasemly.. Some will even port match your intake and polish your exhaust for an extra $85..
__________________
DSM geek
|