View Single Post
  #3  
Old 02-27-2006, 09:56 PM
sdananay sdananay is offline
AF Newbie
 
Join Date: Mar 2005
Posts: 10
Thanks: 0
Thanked 0 Times in 0 Posts
Re: parking brake lamp

Quote:
Originally Posted by baylensman
the dash warning lamp showing two (2) icons one is a pictograph of a brake i guess with the letter "I" in it the other with the letter "P" in it. the light is light. when i push on the parking brake the lights get brighter. When i release the parking brake the ligh dims but does not go out. the master cylnder is full, i have pulled all four wheel and inspected the brakes. Plenty of thickness on the pads same on the rear shoes. no leaks or signs of fluid loss. all cables lines and the two 9wires) i found attached to brake components are all clean and intact no rub marks or burn throughs. the booster does not appear to be leaking vacum. I'm at a loss as i don't know excatly what the dash light indicates and everything appears fine
I have the same problem with my 1989 S-10 4.3L TBI. What did you find was the cause of the bright-dim phenomenon?

Steve
Reply With Quote