Quote:
|
Originally Posted by endlessheart666
You should open up the exhaust. Get an exhaust and header/downpipe, most likely a good deal off of ebay
|
The stock 2.25" piping on the exhaust is fine. A header is a good idea, but the exhaust is not needed in the early stages of the neon. Most people do the the following:
1.CAI
2.UDP
3.Bigger TB (you can put a throttle body from an ATX as it's 52mm, unlike the 49mm the MTX has)
4.Header
5.Prothane motor mount inserts and rear booble strut( to eliminate wheel hop)
After the simple boltons like the above then you move on to cams, cam gears, and so on!