|
Re: Mounting Trailer Brake Controller
Welcome, there are wires under the dash near the outer drivers side floor vents. To fins them, remove the lower kick panel and then they should be taped to the main harness of wires. Unwrap them and then connect them to the correct wire on the trailer brake. Be care and use the wire colors that are taped to the harness in the truck, as the colors are different. I mounted mine on the lower left side of the kick panel so it is easily viewable but not in my way at all while driving.
__________________
-Erik
2002 Chevrolet TrailBlazer LT 4X4 -Summit White w/Oak interior
Many Mods, latest: EFILive tuned by (me)
|