Quote:
|
Originally Posted by pullinmyhairout
Fuel gauge moves from empty to full,just not accurate. It might read empty when you fill the tank.Miles to Empty readout displays, but isn't accurate.Temp gauge seems to be working.My experience with a test light is limited.Sorry about your fingers,but I appreciate the help.
|
So it's not just that the scale seems off (reads empty, but there's still about 5 gallons left in the tank), but rather the readings are sporatic?
It would be a pain in the butt, but you could pull the dash and run a wire out where you can get on it with a DMM and monitor the voltage when you're driving and compare it with the guage reading.
Or, you could pull the wiring to the sending unit in the fuel tank and put a variable resistor/potentiometer in there and slowly turn it, looking to see if the guage is responding accurately.
-Rod