[nissandoc]

one other thing you can try is "throttle valve closed position learn". first make sure that engine and trans are at full operating temp, all electrical loads off and trans in park.

1. turn ignition off and wait at least 10 seconds.
2. accelerator pedal fully released, turn ignition on and wait 3 seconds.
3. fully depress and then release accel pedal 5 times within 5 seconds.
4. wait 7 seconds, fully depress the accel pedal and hold it for approx. 20 seconds until the MIL stops blinking and turned ON.
5. fully release accel pedal within 3 seconds after the MIL goes off.

let me know how it goes.