[yelo]

fujimi do fit tamiya kit with some modifications. you just have to enlarge the hole in the disque brake parts to something like a 1/4 of an inch. then you have to enlarge the recess for the "polycaps" to the same size. go slowly with a demel tool and a deburing carbide bit until you are real close to the final size. then take your 1/4 inch drill bit and grind the tip of it square so you'll be able to enlarge the hole but keep the bottom of it straight. do it by turnning the drill bit in your finger (the use of a motor tool if too powerful and will break the part, tust me, i know). then the wheel should fit your model in a correct manner.

that my solution to that probleme
yelo