|
Re: engine build
An 84 MM bore would be boring out to a 2.0L B20. I believe right now you are at 81mm.
Thats how they make a B18B into a B20 is by boring it from 81 to 84.
So since you are using a B18c Which has slighly less displacement than a b18B It will still be slightly smaller than a B20 when bored out to 84. However its not a significant difference.
__________________
Old:
1993 Acura integra gs-r
New:
1998 chevy BlaZeR2~ AKA "Jeep recovery device"
Newer:
2007 Honda CB900F "919"
|