|
Re: front brakes
To do it right you will need to remove the lock out hubs , manual or auto. Then you will need special 4 prong socket for the double lock nuts. After pulling hub and lock nut remove washer and second lock nut. After that the outer wheel bearing will come off and also the rotor will be able to be removed for machining. This is the time to clean inspect and repack your wheel bearings. If you never did front brakes before this is not the one to start on.
__________________
1967 cougar 390 FE in progress
1993 F350 Crew Cab 5.8 111K
1983 Coachman 23ft class C 460
1988 Bronco 351 C6
1964 Galaxie 428 4sp project
1995 Mustang 3.8 Auto
1966 Mustang Fast back Project
1994 Tracer Trio 1.9
1968 F250 Camper Special 390
|