Quote:
|
Originally Posted by HeadlessHorseman
I wish you luck, Mike! I would also be interested in knowing a couple of other things (if you don't mind  )...
1.) What is the socket NUMBER of the 40amp fuse for the Blower Motor Relay of your '01 (this number is different for 1996 [Socket #3], 1997 [Socket #7] and 1998 [Socket #21]), and
2.) Where is the socket LOCATION of the 40amp fuse for the Blower Motor Relay of your '01 (my '96's socket is located in the Power Distribution Center [PDC] under the hood, driver-side).
Thanks in advance and Good Luck again! |
Dang if I can find that Resistor Block...
I tried looking again on the firewall, just can't seem to see anything in there up high or lower with three wires running into it...
There appears to be some kind of cover that is mounted up high on the firewall and it appears to go over the wiper motors and such. I will take that off next to see if that Resistor Block is hiding behind there.
I tried looking on the blower motor too. There was a little black box that was held on by two screws and had a set of small wires running into the back... I thought I was going to luck out there...
It was a little motor assembly with gears in there... I'm guessing that would be the motor for the "Blend Door". I put that back together and installed it back on the blower motor.
As far as the Blower Motor Relay... It is located in the engine compartment in the IPM - Integrated Power Module right next to the battery. I'm not sure of the socket number but I was able to scan a pic of the cover and labeled them to post a pic on the forum. I'm unable to attach anything so I could e-mail you HeadlessHorseman if you would like to see the exact location of the Blower Motor Relay.
Thanks,
Mike