I am having a similar problem after replacing a rear wheel cylinder on my 94 w/ rear ABS and 10in. drums. I get only a few drops of fluid when trying to bleed the rear brakes. I am aware of the 15/16 nut on the ABS valve with the rubber cap and the long spring underneath it. Are you saying that you removed the nut and spring then started the vehicle to reset the ABS? Did you pump the pedal with it running and the spring removed? Any details would be appreciated.
Quote:
|
Originally Posted by Una-Ford-Able
Well thank for the help every noone. I figured out the problem with a lot of time and effort. There is a 15/16 nut that has to be unsrewed to remove the spring pressure on the Antilock brake plunger(Antilock brake valve). Once released with the truck started/running the anti lock registers and the fluid can flow to the rear brakes when pumped.
|